Electrician in Doncaster

AMP Pro Electrical is a local, family-run electrical company based in Armthorpe, Doncaster (DN3 3BZ) and run by owner-electrician Paul Carrick. We're a fully insured NICEIC and NAPIT-registered firm carrying out domestic and commercial electrical work to the BS 7671 18th Edition wiring regulations — which means every job we certify is signed off by a registered competent person and notified to Building Control where Part P requires it.

Because we're Doncaster-based, we know the local housing stock: the older wiring in Cantley, Bessacarr and Wheatley, the renewal work around the ex-colliery villages of Stainforth and Mexborough, and the first-fix and second-fix demand on the newer Lakeside developments. Whether you need a single socket, a full house rewire, an EICR certificate or an emergency call-out, you deal directly with the electrician doing the work — not a call centre. We give a clear, written price before we start, so there are no surprises. Get in touch for a free survey.

We're a full-service electrical contractor, which means whatever the job we can handle it under one NICEIC/NAPIT roof — from a periodic safety inspection to a complete rewire or a commercial fit-out. Below is an overview of our core services, each with its own dedicated page where you'll find detail, scope and honest pricing. If your job isn't listed, ask — if it's electrical, we almost certainly do it.

• EICRs & landlord certificates — fixed-wiring safety testing for homeowners, landlords and businesses.
• Full & partial rewires — from a single circuit to a whole-house renewal.
• Fuse board / consumer unit upgrades — modern 18th Edition boards with RCD/RCBO protection.
• Electrical fault finding — tracing tripping breakers, dead circuits and intermittent faults.
• EV charger installation — OZEV-grade home and workplace chargers.
• New-build first & second fix — from cable runs to final connection and testing.
• 24-hour emergency call-outs — fast response across Doncaster and South Yorkshire.

An EICR (Electrical Installation Condition Report) is the formal inspection and test of a property's fixed wiring against BS 7671. We check the consumer unit, circuits, sockets, switches and earthing/bonding, then issue a report coding any issues C1 (danger present), C2 (potentially dangerous) or FI (further investigation) — a property is only satisfactory if it carries none of these. Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, landlords must have a satisfactory EICR every 5 years and provide it to tenants and, on request, the council. We test, report, and where you need it carry out the remedial work and re-issue. See our EICR cost and landlord EICR pages for full detail and pricing.

If your home still has rubber, fabric or early PVC cabling, a fuse box without RCD protection, or not enough sockets for modern life, it may be time for a rewire. We carry out full rewires (every circuit renewed, new consumer unit, new accessories) and partial rewires (specific circuits — often kitchens, bathrooms or a known fault area) so you only pay for what genuinely needs doing. A lot of Doncaster's older terraces and inter-war semis around Wheatley, Hyde Park and Balby reach this point eventually, and a phased partial rewire is often the sensible route. Every rewire is tested, certified to BS 7671 and notified under Part P. For honest cost bands by property size, see our house rewire cost page, or rewires & new builds.

The fuse board (consumer unit) is the heart of your electrical safety. Older boards with rewireable fuses or a single RCD don't meet current standards — a modern 18th Edition board with RCBOs protects each circuit individually, so a fault on one circuit no longer plunges the whole house into darkness. We replace boards as a standalone job or as part of a rewire, and crucially we test the existing installation first: there's no point fitting a new board onto wiring that won't pass, so we'll always be straight with you about what the test shows. Every board change includes full testing, certification and Part P notification. Full scope and pricing on our consumer unit upgrades page — and if a board is tripping, start with fault finding.

A breaker that keeps tripping, lights that flicker, a dead socket ring or a burning smell are all signs of a fault that needs a registered electrician — not guesswork. We use proper insulation resistance and continuity testing to isolate the cause rather than swapping parts and hoping. Common culprits we trace in Doncaster homes include water ingress on outdoor circuits, failing immersion heaters, borrowed neutrals in older wiring, and overloaded RCDs. We find the fault, explain plainly what's wrong, quote the repair before doing it, and re-test to confirm the circuit is safe. If you have a burning smell, sparking or exposed live conductors right now, treat it as an emergency — see emergency electrician. Otherwise, our fault finding page explains the process.

As a MCS-certified renewables and EV installer, we fit home and workplace EV chargers to the 18th Edition and the EV-specific regulations, including the load assessment and earthing arrangements (PEN-fault protection) that a safe, compliant install demands. We'll check your supply can take the charger, recommend a 7kW unit suited to your driving, and notify Northern Powergrid — your local DNO — where required. Many Doncaster homes pair a charger with solar panels and a battery to charge cheaply (or from the sun), and as an MCS firm we can install the whole system to qualify for 0% VAT where eligible. Full detail and honest pricing on our EV charger installation page.

New-build & extension wiring: we handle first fix (cable runs, back boxes, consumer unit position, before plastering) and second fix (sockets, switches, lights, final connection and testing), working to plans and to BS 7671 with full certification on completion. This is steady demand on Doncaster's newer developments such as Lakeside, plus extensions and loft conversions across the borough. See rewires & new builds.

24-hour emergency electrician: total power loss, tripping you can't reset, burning smells, water reaching electrics or storm damage — we respond fast across Doncaster and the surrounding towns, make the installation safe, and carry out the lasting repair. For a power cut affecting your whole street, call 105 (the free national line to Northern Powergrid); for a fault inside your property, call us on 0333 577 5464 or see emergency electrician Doncaster.

We're based in Armthorpe and cover the whole of Doncaster — Cantley, Bessacarr, Wheatley, Balby, Hyde Park, Edenthorpe, Sprotbrough, Tickhill, Thorne, Mexborough, Conisbrough and Stainforth — plus the wider South Yorkshire, North Nottinghamshire and Lincolnshire radius. Most of our service area sits within the Northern Powergrid (Yorkshire) network, which keeps DNO notifications for EV chargers, solar and supply upgrades straightforward.

We also serve the surrounding towns with dedicated local electricians — each with its own page covering that area's housing and councils:

• Electrician Rotherham
• Electrician Barnsley
• Electrician Sheffield
• Electrician Wakefield
• Electrician Worksop
• Electrician Scunthorpe
• Electrician Chesterfield
• Electrician Mansfield
• Electrician Lincoln
• Electrician York

There are plenty of electricians in Doncaster, so here's why homeowners, landlords and businesses choose us:

• NICEIC & NAPIT registered — independently assessed competent persons; our certificates are accepted by councils, insurers, solicitors and lenders.
• MCS certified — so we can fit solar, battery and EV systems compliantly and qualify them for 0% VAT where eligible.
• Fully insured — public liability cover on every job, domestic and commercial.
• Local & owner-led — you deal directly with owner-electrician Paul Carrick, based in Armthorpe, not a national call centre.
• Honest, up-front pricing — a clear written quote before we start, with free surveys and no hidden extras.
• Work to BS 7671 18th Edition — every job tested, certified and Part P notified where required.

We will never quote a price we can't stand behind. If a job is bigger or smaller than first thought, we tell you before we proceed. Book your free survey today.

Every property is different, so the figures below are honest 2026 guide ranges for typical Doncaster jobs — your exact price depends on the property, access and what testing reveals. We confirm a firm written quote after a free survey, and we never invent precision we can't justify. For job-specific detail, follow the links to each service page.

• Domestic EICR — from around £120–£250 depending on the number of circuits (EICR cost).
• Fuse board / consumer unit upgrade — typically £450–£900 (consumer unit upgrades).
• Full rewire, 3-bed house — typically £3,500–£6,500 (house rewire cost).
• Emergency call-out — from around £75–£150 for the first hour (emergency electrician).
• EV charger installation — typically £900–£1,400 fitted (EV charger installation).

Need a precise figure? Request a free survey and we'll quote in writing.