Electrician in Harworth

Harworth and Bircotes sits about 9 miles south of our base in Armthorpe, Doncaster, so it is comfortably inside our standard service area. Our vans cover the town centre, Scrooby Road, Bircotes and the fast-growing new-build estates rising across the former Harworth Colliery brownfield site — including Harron Homes' Simpson Park and the neighbouring Kier, Jones Homes and Miller Homes plots.

AMP Pro is led by owner-electrician Paul Carrick and every job is carried out by a registered electrician working to the BS 7671 18th Edition wiring regulations. We are registered with both the NICEIC and NAPIT, so our notifiable work — consumer units, new circuits, rewires — is certified and self-notified to Building Control under Part P. You get the proper paperwork, not a verbal promise.

One important local detail: Harworth is in north Nottinghamshire, not South Yorkshire, so the distribution network operator here is National Grid Electricity Distribution (NGED, East Midlands) — not Northern Powergrid. Any job that needs a supply alteration, a new connection or an EV charger notification goes to NGED, and we handle that for you. Whether you are a homeowner, landlord or business, you deal directly with the electrician doing the work. See our main Doncaster service area, or get in touch for a free survey.

We are a full-service domestic and commercial electrical contractor, so most Harworth jobs are covered by one of our core services:

• EICRs and electrical safety testing — periodic inspection reports for homeowners, landlords and businesses, with clear C1/C2/C3/FI coding.
• Full and partial rewires — often needed in Harworth's older colliery-village terraces and post-war semis where the original wiring is past its safe life.
• Consumer unit (fuse board) upgrades — replacing old rewireable and plastic boards with modern RCBO/RCD-protected metal units.
• Fault finding and repairs — tripping circuits, dead sockets, flickering lights and burning smells traced methodically.
• EV charger installation — 7kW smart home chargers for the commuter households near the A1(M) junction 34, with the NGED notification handled for you.
• Emergency call-out — power loss, exposed live wiring and other make-safe emergencies.

We also fit sockets, lighting and outdoor power, and we install solar PV and battery storage — a strong fit for Harworth's modern EPC A/B new builds. For local renewables detail see our solar panels Harworth, battery storage Harworth and EV charger Harworth pages, and we handle landlord compliance for letting agents across DN11.

From our Armthorpe base we cover Harworth and Bircotes and the surrounding north Nottinghamshire and south-of-Doncaster villages — the town centre and Scrooby Road, the former colliery redevelopment area (Simpson Park and the wider ex-pit estates), plus Bawtry, Tickhill, Blyth, Styrrup, Oldcotes, Scrooby, Ranskill and Misson. Sites we are often working near include Harworth & Bircotes Town Centre, Plumtree Farm Industrial Estate and the A1(M) junction 34 that keeps the town well connected to Doncaster and Worksop. Our nearest neighbouring electrician area is Maltby, a few miles to the west.

Harworth has an unusual mix of housing. In the established parts of town there are interwar and post-war colliery-village terraces and semis, many still on tired wiring, undersized fuse boards and circuits never designed for modern showers, kitchens and EVs. Alongside them, the former colliery site is delivering well over 1,300 new homes — Harron Homes' Simpson Park plus Kier, Jones Homes and Miller Homes plots — where the work is more about additional circuits, EV points, solar and getting the paperwork right first time. We work across both every week.

For landlords, we provide EICRs that meet the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, which require a satisfactory report every five years. The main new-build estates sit under Bassetlaw District Council with no AONB or major conservation constraint, so most domestic electrical work is straightforward — though we always check the position on any listed or heritage-sensitive property first. What you get with AMP Pro: dual NICEIC and NAPIT registration, fully insured work, certificates for all notifiable jobs, honest written quotes, and the correct DNO handled — NGED, not Northern Powergrid.

Every Harworth property is different, so we always quote after understanding the job — but here are honest 2026 guide ranges so you know roughly where you stand before you call:

• Electrician rates: typically £40-£60 per hour, or around £150-£280 per day for larger jobs.
• Domestic EICR: typically £120-£250 depending on the number of circuits and property size.
• Consumer unit / fuse board upgrade: typically £450-£900 supplied and fitted, depending on board size and any remedial work.
• Full rewire (3-bed): typically £3,500-£6,500 depending on access, plastering and how much can be reused.
• EV charger installation: typically £800-£1,200 supplied and fitted for a standard home install, including the NGED notification.

These are starting ranges, not fixed prices — your actual quote depends on access, condition and scope. We give you a clear written figure before any work begins, and there is no charge for the quote itself. See our detailed EICR cost and rewire cost guides for full breakdowns. Call 0333 577 5464 for a free Harworth quote.